Memorial Day Weekend Cruise to West Palm Beach Pt. 2

West Palm Beach Anchoring

As mentioned in the last post (click here) We're anchored at West Palm Beach Florida.

The current is vicious here! We've seen 4 knots in the direction of the tide, right now it's flowing southerly, We're anchored with two bow anchors and one stern anchor and they are holding well. The good news is that we're in 9' of water. The Stream does give concern when taking the dinghy out into that stream, we have to be able to do at least 4 knots, "Special's Dink" should be fine, we have a 4hp outboard and it's only an 8.5' Mercury dinghy, doesn't get up on the the plane but clips along nicely if only 2 people on board. So sorry folks dinghy trips in Special's Dink doesn't look like an option. 

Ohana arrived at nearly dark last night and after dinner at Bradley's they anchored between the two city docks with several other boats. Meanwhile, as the tide changes we just hung about secure on our anchors. The only other downside of being on the East side of the Waterway is the frequent crazies on their power boats churning up the waters and making Peggy wish she had taken a dramamine. Lumpy.

lt rained briefly around 4:30 this morning and I had a mad dash about the boat to close the ports and hatches which were open to keep the boat cool. It only lasted about 10 minutes and we opened up the main v-berth hatch for the welcome breeze. FYI, I attach a spare halyard to the bow of the dinghy when it's on deck and we're at anchor so that I can raise it enough to open the v-berth hatch which is below the dink.

The Bow line that we set between Affection's Stbd side and Eximius' Port side was stretchy, so when the wind picked up a bit last night the two bows were able to wander apart a few inches and the stretch caused a shriek from the line each time it tightened. Jeff & I were both on deck and we changed it out for a larger non-stretch dock line and ran it through a Chock on Eximius to reduce the load on the cleat.  Worked great, the rest of the night was peaceful.

During breakfast, Peggy & I discussed our plans for the day - not many - I need to work on the club's Newsletter, I have a couple of projects that I could get done. Hope to be able to discuss some details of upcoming club events with the Cruise Committee (they're captive audiences :) ) and send out some emails to family and friends. Peggy is going to get in some practice and I'll do some chin wagging. Later today several other boats are going to arrive. Dalecarlia, Imagine, Cookie Monster, Aireze and a couple are arriving by car. So maybe a bit more chin wagging.

See you on the water. Oh! Today's pics:

Neighbors - Affection and Alebrije 

Looking North. City Docks are on the left (West) side.

Memorial Day Weekend Cruise to West Palm Beach Pt. 1

 HISC Memorial Day Weekend Cruise to West Palm Beach.

After spending Thursday night on Lake Boca tied up with Affection (Jeff's Boat ! ) we pulled anchor at 07:30 in order to get the 07:40 Camino Real Bridge opening while Affection motored out of Boca Inlet, his draft is just 3' ours is nearly 6' and Boca Inlet is too stressful for us.

07:43 we passed Camino Real Bridge and motored the 20 minutes to Hillsboro Blvd Bridge, then it was a long slog of 60 minutes against the current down to the Hillsboro Inlet Bridge, by the time we were ready to pass the bridge, Eximius was pretty well dressed for the Day, Sails & Sheets ready, fenders all inboard, Lines secured, ready to hoist the sails. 

Just as expected, the wind was very light as we navigated carefully out of the inlet and avoided the shallow area on the North side of the Inlet and 'gonna get you' shoals on the South side of the inlet.

We turned to 045º with the intent of trying to reach the Gulf Stream under motor while the wind was so light. We did raise the sails but they pretty much just hung there. By the time we were a mile and a half off of the shore, we were feeling the Stream pushing un north. Engine given a rest and we trimmed the sails. With less than 5 knots of wind, we were barely moving through the water, just 2knots. But the Gulf Stream was dragging us North an additional 4 knots! Expecting the wind to pick up before lunch time, we stayed on course.

Soon the wind picked up to around 7 knots, and our GPS speed was 9.5knots WooHoo! The Sea was very steady and it was an easy sail. The Autopilot managed just fine once we had some speed through the water.

The only issue was that the course that I imported from Fastseas.com had some issues. Last night I had reviewed the route on fastseas.com and switched the Start and Finish over so that we could see what the return trip would be like on Monday. Totally forgot that I had switched the Start an Finished and proceeded to export the route. Once it was on a chip, we imported it on our chartplotter then set the GPS to follow the route. 

Sounds ok, except that I had not remembered the switch over. So initally the chartplotter reported that we would reach our destination by noon. That was great, a bit unrealistic, but great. As we proceeded, the arrival time got later and later.

Duh! 

Once I realized the problem, I simply deleted the route and set a route to arrive at Lake Worth Inlet. 

All of a sudden, our late night arrival was now around 2pm.

By 13:15, the wind had dropped back to less than 5 Knots after spending a hour or so above 8 knots. It also veered to 180º and was no fun. So time to wake up the engine and motor for the next few hours to get to our destination.

We arrived in time to get the 3:15 Flagler Memorial Bridge opening and followed a big barge through the turbid waters at the bridge. Once through, we could see Alebrije and Affection anchored on the East side of the ICW almost directly East of the new Public City Dock. A quick call to Hector and we had an agreed plan to join them in a 3 boat raft up.

Plan was to motor ahead of their anchored location leaving them to Port. Drop our anchor about 100' South of them, dig it in and then back down with the current till we were due west of them both, and finally, Toss a line to them to close the gap and tie up alongside Affection.

We were a bit more than 100' ahead of them when I dropped the anchor. Of  course, it dug in right away. I eased out the 100' of chain and another 80' of 1" rode line. Once we had a line over to Affection, we, the crews of Alebrije and Affection, were able to close the gap, setup a bunch of fenders and take a well earned break.

All of us agreed on a 5:30 happy hour. Peggy & I took a bottle of wine and a bag of Chocolate Pretzels, of course we also took a bottle of Black Magic Rum and our own wine/rum glasses.

It's a beautiful view across the waterway this evening.

Routing around the Crunchy bits

 Using Fastseas.com to plan a route Pt II

A buddy asked if fastseas.com routing considered the position of shallow water when planning a route.

Looks like the answer is yes! But check it out for yourselves.

Here's an image of a quick a couple of routes I setup from starting points in the Bahamas.

Obviously, it's important to review the route zoomed in when on the Chart Plotter to make sure the Route is staying clear of the 'Crunchy' bits.

The two routes in Red and Orange were auto calculated by Fastseas.com and were both set to start off shore in the Bahamas.

By importing the route data to our Garmin, we can see that we need to modify the route to suit our preference along the way.

I'm still impressed, will report back after this weekend's trip.

See you on the Water.

Using FastSeas.com for Routing

Using fastseas.com for weather routing

We're sailing Eximius up to Lake Worth this weekend and using fastseas.com for weather routing for the first time (Paid Subscription) 

First learnt about fastseas.com from a sailing vlog on YouTube. Looked pretty interesting so tried it out first as a freebie account but quickly upgraded to a paid subscription.

So, in preparation for our trip to Lake Worth here's what I did.

Once logged in, I created a new route with a start and finish position. Both of those have to be on the water! Duh. In this case I setup a start that was 3 miles off of the Hillsboro Inlet. Chose that as we need to pump out beyond the 3 mile limit before arriving at lake worth for a few days stay.

I set the parameters for the wind speed at which I would turn on the engine and the ideal wind direction off of the bow. With all of parameters set. I chose the Start date and time then just click on the Calculate Route. A few seconds later I got the image shown above. The yellow line shows the recommended route that also includes wind direction and speed during the trip and it includes the current conditions along the route.

If I play the time line, the route is shown in action as the time passes our departure time and our position along the route as time passes. 

On this particular trip, with the weather forecast  4 days out, the route shows us moving towards the coast and tacking to make the best speed with the wind at the time of transit.

This is good, but it shows the route on the computer and I would really like it to be shown on my chart plotter - good news is that it's doable!

Step one (after establishing the route) is to download the data as a file format that suits Garmin's Home Port software. Most of the download options work.

Now that I have it downloaded, opening homeport I can import the route

Selecting the downloaded file and clicking on Open, imports the route data into homeport

Now to view the route in homeport

Now the route is shown in Home port, all of the route waypoints are displayed.

Next I need to copy them to a Micro SD Chip to transfer them to my Garmin 746xs Chartplotter on the boat. 

In practice, I would do all of this on the morning of the trip so that it is based upon the most up to date weather forecast.

Right clicking on the Route name within my collection in HomePort gives the option to 'Send To'. I select Device and the empty data SD chip.

Clicking on 'OK' copies the route data to the chip.

Now all we need do is to import the data into the chart plotter. 

On the boat, we insert the chip and import the data.

Now we have the route in our chart plotter and can simply instruct the chartplotter to follow the route, it will show us when we need to turn in order to stay en-route.

This is totally cool! Obviously, it's most accurate the closer the route is calculated to the departure time. 

I figure it takes all of 5 minutes to prep the chip from the moment I click on 'Calculate Route' till the data is uploaded to the chart plotter.

Hope you found this useful, please leave a comment and any questions you have, happy to answer them. As long as they are sailing or boat owner related :)

See you on the water.

Here's a link to another post on this subject: https://www.sailingeximius.com/2021/05/routing-around-crunchy-bits.html

 Keeping notes of things to do on the boat

It seems that every trip is responsible for pointing out that we need to do something on the boat, some before the next trip. Even though I'm retired, life is pretty hectic and I just don't keep  notes in my head as well nowadays.

I have tried using spreadsheets, but it's a little cumbersome. Then I found Google's Keep Notes.

Keep-Notes is a google app that can be installed on Android phones, Tablets but is also available on the web at https://keep.google.com/

It's a really simple App/Website (you would hardly know you were on a website) and allows multiple notes to be kept and accessible from the google account. 

If I keep notes on the web via Chrome, that same, updated, note is almost immediately available on the phone app.

Here's an example of a recent note. The items in this note are setup as Checkboxes, if I check off the box that item is shifted into the Completed Items list which is below the uncompleted items list.

Setting up a check off list is optional, if I just want to keep a text note, I just start typing or use the Voice input. Of course, voice does not always get it right as the list below demonstrates - (Just keeping it real here)

This note was created via the App (Voice is an option on the App)

The list was of the boat names that participated in a recent HISC cruise on St. Pat's Day at Sunrise Bay in Florida.

The boat name list should have read:

Imagine

Rabbit

Alebrije

Dalecarlia

Affection

Duet

Pegasus

Eximius.

I kinda like the interpretations.

I find that the lists being available on all of my google devices is a huge benefit. eg. I keep a list titled 'Lowes' containing items I need to get at my next visit to Lowes. I can edit the list on my laptop at home and then review the list when I'm in Lowes.

I really like the simplicity of the whole system, but it does have a few more tricks.

eg The 3 dot menu in the bottom line of any list includes the option to copy the list to Google Docs. I know, I could just cut and paste the note into a google document, but it's an easy process to copy it over.

Typically I have multiple notes: Winn Dixie, Lowes, Eximius, House and more.

Hope you find this useful.

See you on the water.

Don't feed your engine Vegitables

Engines don't like Veggies

 

A friend asked if I could help her out. Her heat exchanger had been taken apart and thoroughly cleaned but it needed reinstalling. Her boat, an Erricson 32, has a very similar engine to my boat. Universal M25XP (her's may not be an XP) and the cooling system is really simple.

This image shows the whole cooling system.

The Sea Water Thru Hull connects to the Oberdorfer water pump, the output of the pump is fed to the Heat Exchanger and the output of the Heat Exchanger is fed to a nipple on the Exhaust where the water is blown through the muffler and out of the back of the boat with the exhaust.

Follow the Blue line that transitions to a yellow line in the heat exchanger.

The problem occured when the skipper started the engine and no water was being blown out with the Exhaust. After discussing it with a few people she suspected the Heat Exchanger. It has a Zinc anode installed in it's body and that zinc was missing, presumably inside the heat exchanger. Hence her reason for servicing the exchanger.

With the exchanger serviced, it was ready to put back together and reinstalled. Not having a lot to do that afternoon, I agreed to help her get it installed and get the engine running.

After checking out the engine for any other obvious issues I reassembled the heat exchanger and reinstalled it. All hoses secured, Coolant replaced, Oil level checked, it was time to flash up the engine.

Thru hull opened, battery selector on and ignition ready. Blower motor ran for nearly a minute, Glow plugs for 20 seconds, check the stop lever was fully in, press the start button and the engine starts up. That's a good sign.

Sadly, still no water pumping out with the exhaust!

The skipper confirmed that the Impeller on the water pump had been inspected. I suggested that perhaps the thru hull was blocked or that the hoses were blocked.

To check the hoses meant disconnecting the raw water hose from the Thru hull, putting it in a bucket of water and running the engine, if the hoses were blocked, then we would know, if they were not then it's a blocked Thru hull.

After spending a few minutes releasing the two hose clamps securing the hose to the Thru Hull, it only took a few seconds to pull off the hose.

We immediately knew the problem.

Yep, that looks like a Green Bean stuck in the Thru hull! I could not pull it up nor push it down (when the valve was opened).

I broke it off at the top of the plastic fitting and then used a wire coat hanger to push the remainder down and out of the Thru Hull. Obviously, water started pouring in so I closed the valve.

Reconnecting the hose, we started up the engine and WooHoo! water was being expelled from the Exhaust.

We let the engine run for about 20 minutes while we checked for leaks and dried everything up.

Moral of the story: Don't feed your engine Green Beans, nor any other type of Vegitable.

Post and Photo with permission of the Skipper.

See you on the water.

Under Sink Illuminatrion

Installing lighting under the bathroom sink

The cabinet under the bathroom sink has a lot of 'stuff' in it. 

1. Thru Hulls (3)
2. Fuel Filter and Water separator
3. DST 810 Transducer (Depth, Speed and Water Temperatur)
4. Electric Fuel Pump

I remove the Transducer when we are tied up to the dock to prevent sealife growth clogging up the speed paddle on the transducer. It only takes a few seconds, but being able to see what I'm doing is a big help.

If the Engine Raw Water Thru hull gets clogged with marine debris and needs to be roto-rooted, I close the Thru Hull, remove the hose, poke a short piece of drain snake down as far as the Thru hull, close of the gap with my hand and then open the Thru Hull in order to push the snake all the way down and out, thus clearing the blockage.

If the Engine Fuel Filter has any water in it, we have to drain that filter, it's easy, but easier if we can see what we're doing

All in all, having some illumination under the sink means I don't need Peggy to be standing over me with  a Flashlight.

Ok, here's the result:

This looks pretty bright, but that's because there is nobody in front of the doorway.

The Switch is in the upper left of this photo.

On the left can be seen the Electric Fuel Pump, below that (and slightly aft) is the Fuel Filter and Water Separator, below that is the Inline Raw Water Filter.

Aft of the Raw Water filter is the Engine Muffler box.

On the right is the Exhaust pipe (Black) which goes all the way aft to the Transom.

To the right of the Exhaust pipe is the Sink Drain hose.

That little black knob that can be seen next to the door opening (to the right of the Sink Drain) is the 2nd Manual Bilge Pump handle.

Ok, and with the new light on:

Literally, Night and Day difference.

The LED lamp is glued to the inside upper edge of the cabinet door opening.

The power is via a double tinned copper wire that runs from the switch, up to the underside of the sink counter, then over to the Port side loomed with some other wires. Then it passes behind the Shower Seat Cabinet, into the Cabinet behind the head, on through the main head bulkhead into the Cabinet (used to be a hanging locker but now has shelves) then up and into the area behind the electrical panel.

The +ve is connected to the Circuit breaker protected 12v terminal block and the -ve is attached to a 12v -ve terminal block. Both of those will be replaced when we do the electrical panel upgrade.

So and easy job, and very worthwhile. I'll probably install this type of 12LED Strip light in the other cabinets as we get to them.

See you on the water.